ClickBenchy!! fidget click clack
Print Profile(1)
Description
Hello
To celebrate the tenth anniversary of the iconic Benchy, I had fun creating this model: a fidget clicker!
After assembling the model, use the chimney to click, and you're ready to play! Unfortunately, due to strength requirements, it's not possible to print it in one piece, and the spring must be made of PETG.
I've tried countless times with PLA, but it doesn't work... maybe you'll have better luck!
The chimney screws in; just be patient.
Remember that every printer and material has its tolerances; in my case, I printed it four times, and it always worked well…if yours is a little stiff, just use a file! :-P
I recommend putting a drop of glue on the chimney for extra security, but it also works without it.
It's important to install the inner part correctly like this:
Then simply insert the cover into its slot:
And finally the chimney:
These are all the tests I carried out to create this model:
Boost Me (for free)
1 boost equals approximately 70 grams of PLA; it costs you nothing, and it helps me continue to create these little projects!
If you like my work… download the model and, if you can, boost me! THANK YOU
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)