Jawa 350 Key Holder – AMS – Hanger
Print Profile(1)
Description
Boost Me (for free)
Every boost will help me in my future work! Thank you very much!
Key holder/hanger
- 0,28mm layer height
- 0,4mm Nozzle
- Only MMU/AMS multicolor print.
- 4 colors
- PLA/PETG
- No support needed
- Drag all the files to your slicer and make it into one piece (except “stick .stl”)
If you use screws to attach to the wall, use a screw with a maximum diameter of 4 mm.
If you use screws to attach to the wall, you must choose at least 4 perimeters and 6 upper and lower layers.
The key holders do not need to be glued to the rest of the hanger. It is enough to press them correctly into the groove and fix them on the wall. Glue can also be used for better adhesion.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)