Case for sunglasses and clip-ons - NOW PARAMETRIC! - Free 3D Print Model

Search models, users, collections, and posts

M3D

Fashion>Glasses

IP Report

Print Profile(4)

All

X1 Carbon

A1 mini

H2S

H2D Pro

P1P

H2C

X2D

H2D

P2S

X1E

P1S

A2L

No Logo - 11.7x142x47mm (inner dimensions H x L x W)

Designer

1 h

1 plate

4.7(11)

Bigger, No Logo - 16,7x145x50mm (inner dimensions H x L x W)

Designer

1.2 h

1 plate

4.7(20)

With Logo, 11.7x142x47mm (inner dimensions H x L x W)

Designer

1.1 h

1 plate

4.5(2)

Taller, No Logo - 16,7x142x47mm (inner dimensions H x L x W)

Designer

1.3 h

1 plate

4.5(2)

Open in Bambu Studio

Boost

308

960

1.1 k

633

Released

Description

New version of your favourite parametric model !

What's new ?

Redesigned from scratch in Fusion for better parametric compatibility.
Now fully square design for easier printing and less post processing.
More parametric options (especially for different magnets).

Your favourite model now fully parametric !

Due to high popularity of this model and a lot of requests, I finally managed to find time to make this model fully parametric.

This means that you can customize both the dimensions of the case and dimensions of the slots for magnet.

It is my first model that is parametric, so if you encounter any issues, please do let me know before giving it bad rating. Thanks and enoy !

Sleek case for clip-on (magnetic) sunglasses. Helps protecting your clip-ons and fits into most pockets.

It is a “print in place” design, so no assembly needed. Uses 4pcs of 4x1mm magnet.

I suggest lining the inside with adhesive EVA foam. I used 2 parallel strips of 30x1mm EVA foam.

But you can use anything soft at your disposal as lining to prevent scratching of the lens.

Boost Me (for free)

Boost Me (for free)
Designing models often involves hours of dedication and numerous test prints to ensure everything is perfect. If you appreciate the effort I put into my designs, please leave a like and give a boost. Your support keeps me motivated and enables me to continue sharing with this amazing community. Thank you for being a part of it!

Check out more of my designs and hit follow so you won't miss any upcoming functional models!
I aim to upload at least one original, practical model every week. Stay tuned! 😊

IMPORTANT: This model requires precise filament settings and printer calibration. Only proceed if you're confident in your setup and filament is thoroughly dried. Otherwise, you may experience tolerance issues, significant stringing and other print defects.

Please note that a poor print due to user error shouldn't be a reflection of the model's quality. If you're a beginner, consider honing your printing skills before attempting this model to ensure the best results.

Size guide:

Comment & Rating (93)

@MakerBreaker66

The parametric case is floating on one end? This is already when I open it in the model maker, can't get it to lie flat on the plate.

(Edited)

@bergjet

Me too

(Edited)

Show original

@MakerBreaker66

Replying to @bergjet :

Creator seems offline. It's a pity, I really like this case.

@bergjet

Replying to @MakerBreaker66 :

Shame

Show original

@smutje

Boosted

Perfect model and excellent support from the designer

The designer has replied

Show original

@MaxSVK

Thank you very much for the boost :)

@user_2848853724

Faulty adaptation in the generator (printed with P1S and PLA), one hinge is missing, on the other hinge the pivot is not possible (breaks immediately). What is the reason for this? It can be seen that the generator shifts the hinges. Download was as 3mf. I'll try again with new generation and download as STL. Update: The new generation worked, but the hinges are still too tight/glued together and break upon first folding. I have no stringing and very dry filament. What else can be improved on my end? PS: I've been printing for a year now and have never had these problems before. I also see that there are no other reviews with problems on the object - so it's probably my fault... but what's the reason?

(Edited)

Show original

@user_297154870

i have the same issue regarding hinges being too tight. I use orca slicer, downloaded as an STL, and printed using a A1 with a fresh, out of the box PLA. I suspect it could either be because of arachne wall generation or variable layer height. I also changed the dimensions of the case to be 50mm tall.

(Edited)

@tony.ch

Print Profile

Bigger, No Logo - 16,7x145x50mm (inner dimensions H x L x W)

Very nice, still need some magnets but fits perfect.

The profile uploader has replied

@MaxSVK

Thank you for the kind feedback :) Looks very nice in the marble filament.

@Tutto3D

Print Profile

No Logo - 11.7x142x47mm (inner dimensions H x L x W)

All ok

The profile uploader has replied

@MaxSVK

Thank you for the feedback. Enjoy :)

@vitor_ribeiro15

I only have 6mm magnets here, but when I put the parameter in the parametric model, it has this defect. Would it be possible to revise it so that when the magnet diameter is increased, the excess is pushed inside instead of leaving the outer wall too thin and with a hole?

@vitor_ribeiro15

the other side of the model “broke” completely

@smutje

Boosted

Hello. Great design. That is what I'am looking for since years for my clip on sunglass. My clip on has a hight of 7mm in the middle. By using an EVA inlay of 1mm it would be grat, if you can upload a case with 9mm total hight inside and 3mm wider? Than the clip on will be not pressed inside. That would fit perfekt. Is this possible? Jens.

The designer has replied

@MaxSVK

Hi Jens, sure, it should be possible. By 3mm wider you mean this inner dimmension ?

@smutje

Boosted

Replying to @MaxSVK :

Hi, That would be great. My apologies, I was a bit imprecise. By width, I meant the long side of the case. Upon closer inspection, an additional 2mm on the short side would also be beneficial. I've attached an image. Without EVA foam lining. Oh, I seem to have mismeasured there as well. The glasses are approximately 12mm high in the center. So a total internal height of 15mm would be perfect

Show original

@MaxSVK

Replying to @smutje :

I uploaded a new print profile with the dimensions you requested. Please check the inner dimensions in slicer before printing. I can adjust the model if needed. Enjoy ! :)

@loriscosta

I created a personal model from the browser but it is wrong on one side, the housing for the magnet is missing! I modified the height and it gives me this problem on the points for the magnets

Show original

@CamShawAuthor

Print Profile

Bigger, No Logo - 16,7x145x50mm (inner dimensions H x L x W)

Absolutely perfect!

@Flor8

Print Profile

Bigger, No Logo - 16,7x145x50mm (inner dimensions H x L x W)

Very useful, thanks!!

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

IKEA SKADIS Add-Ons: Parametric Bins and Shelves

Kino

41.7 k

23.2 k

Sunglasses case (clip)

Nibbi0

Classic Clip for Sunglasses

JensenCraft

3.8 k

777

Clip for Sunglasses

EFSM Print Solutions

2.3 k

619