Jet Engine Motorized stand with non-slip
Print Profile(1)
Description
I had made a stand;
The originally with Non-slip pads to display the CATIAV5FTW turbine.
I noticed that 3d_printall made a motor adaptor named N20 Motor mount for Jet Engine (https://makerworld.com/en/models/157767-n20-motor-mount-for-jet-engine?from=search#profileId-206779) . After finding motors and controllers online, it worked great. Because of this mod, I had to design a new stand. This print is a test bench look designed to look like a turbine test site set up. There is mounting for the moto controller and tunnels to hide the wires. I will post what I bought to make this motorize display come to life down below. I made a guide attached on construction.
Note!!: lesson learned the hard way. When i made the stationary turbine, no glue was needed. If you make it a motorized turbine, you MUST use Locktite to ensure the screws and nuts used to put the model together don't vibrate off.
Amazon parts list: Can be changed to other brands or models if needed.
DC Motor. https://www.amazon.com/dp/B083GM3JV5?ref=ppx_pop_mob_ap_share
Speed Controller. https://www.amazon.com/dp/B08BJ4WQCV?ref=ppx_pop_mob_ap_share
Power Adapter. https://a.co/d/bmha5Fv
Wires. https://a.co/d/cXG1xsN
Boost Me (for free)
If you want to support an amateur designer.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)