Search models, users, collections, and posts
Philips Hue Signe "Replica"
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 10% infill
Designer
6.3 h
1 plate
Open in Bambu Studio
Boost
77
277
5
2
79
11
Released
Bill of Materials
List other parts
- BTF-LIGHTING WT-SPI WiFi Tuya RGB Contrôleur de LED x 1: https://fr.aliexpress.com/item/1005007666943182.html?spm=a2g0o.productlist.main.1.6b59E48mE48mnD&algo_pvid=6af69236-7ff0-48fc-8b46-d2b7403a5ca1&algo_exp_id=6af69236-7ff0-48fc-8b46-d2b7403a5ca1-0&pdp_ext_f=%7B%22order%22%3A%22113%22%2C%22eval%22%3A%221%22%7D&pdp_npi=4%40dis%21EUR%2121.10%2115.19%21%21%2123.42%2116.86%21%402103917f17449092578268837e0efd%2112000041720595168%21sea%21FR%214048072914%21X&curPageLogUid=N7iAjXornjzx&utparam-url=scene%3Asearch%7Cquery_from%3A
- Gonine 12V Alimentation 2A 24W AC Adaptateur Chargeur Mural x 1: https://www.amazon.fr/dp/B0B9BFTY3T?ref=ppx_yo2ov_dt_b_fed_asin_title
- BTF-LIGHTING FCOB SPI RGB Bande flexible de LED haute densité COB WS2811 IC Bande lumineuse 5M x 1: https://www.amazon.fr/dp/B0BW59PD5F?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
- Connecteurs cc 5.5x2.1mm 3.5x1.3mm prise d'alimentation cc mâle femelle x 1: https://fr.aliexpress.com/item/1005003324016159.html?spm=a2g0o.order_list.order_list_main.75.1e005e5bQ5EPd0&gatewayAdapt=glo2fra
- M3 M3 * 5.7-OD4.6 filetage moleté x 1: https://fr.aliexpress.com/item/1005002288716120.html?spm=a2g0o.order_list.order_list_main.32.1e005e5bQ5EPd0&gatewayAdapt=glo2fra
- Electric cable x 2:
- LED tube x 1: https://www.barcelonaled.fr/ruban-led/profile-aluminium-ruban-led/profile-aluminium-suspendu-ou-saillie-diametre-23mm-2m.html?srsltid=AfmBOorsAQqkgFyJ997NyW09vHvMK6jWvDVoXaaXm_D6vLxzqNVailHK
Description
Boost Me (for free)
Hi you! If you see this, It's time to put LED into your house.
Easy to produce, and realy plug and play, this model is made for you.
So enjoy it and don't hesitate to leave a comment if you like it (or not)
Please Enjoy this project, for those who loved LED, but feel Philips Hue is a bit too expensive sometimes…
Tools I used:
- Bambulab X1C
- Soldering Iron
- Wire stripper
- Cutting pliers
- Screwdriver
- Glue
Instructions :
- 3D prints all the part.
Use the Soldering Iron to put all the Brass insert nuts. In total there is 6.
Fill the tank area to create weight. I used rice on my side, but you can also use a fishing sinker.
- Glue the Tube holder to it.
Solder all the cable together following this guide (depending on with light strip you pick).
- Cut the Tube at the right size.
- Cut and slide the LED Strip inside.
- Screw the Base with the Main body.
- Close the Main body with the cap (I kept it without gluing them together).
Connect you Lamp via the “Match” button on the WT-SPI WiFi Controller into the App “Smart Life”.
Enjoy your Lamp.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (5)