Chibiusa Saior Moon Bookmark Hueforge - Free 3D Print Model

Search models, users, collections, and posts

nekkiquake

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

A1 mini

X1E

P1S

X1 Carbon

P1P

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

1.3 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Overture Matte Black Transmission Distance: 0.1
    PLA Overture Matte Pink Transmission Distance: 2.5
    PLA sunlu red Transmission Distance: 3
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Pink
    At layer #15 (1.28mm) swap to Black
    At layer #17 (1.44mm) swap to red
    At layer #19 (1.6mm) swap to Pink
    At layer #21 (1.76mm) swap to Jade White for the rest.

Boost Me (for free)

If you like the models I create, a Boost would be really important for me! :) Thank you!