Car Coin Cup Holder [US/EU Sizes]
Print Profile(2)
![US Coin Holder * [0.12mm layer, 4 walls, 10% infill]](https://makerworld.bblmw.com/makerworld/model/USb3964558c6603a/279134765/instance/2025-04-17_95a00f260b639.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
![EU Coin Holder * [0.12mm layer, 4 walls, 10% infill]](https://makerworld.bblmw.com/makerworld/model/USb3964558c6603a/279138002/instance/2025-04-17_3429daf5aa3238.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Bill of Materials
Description
Boost Me (for free)
Boosts help buy more filament for testing new designs! And it makes this amazing hobby feel that much more rewarding to see that people enjoy what you make.
Warning: Printing in PLA can lead to a soft print that may sag or deform in the hot sun. Your local area and its average midday temperature will determine if PLA is viable for you. Where I am, PLA works fine. If you print this in a more temperature-resistant material, you can probably lower the wall count to 2 and be fine
If you want me to adjust the sizes for your own countries coin sizes, please just let me know.
Both profiles are set with 4 walls and 10% cross-hatch infill. Both also have a modifier cube at the top set to 99% infill to marginally increase the strength of the finger-grabber section. Additionally, you can do what I did and put a key ring on the top, like the split-ring key chain available on Maker Supply; See the parts section below.
The US print profile has these coins:
- 25c, 5c, 25c, 25c, 10c
The EU print profile has these coins:
- €2, 20c, €1, 50c, 10c
Also Note: I marked it as non-commercial so please get in touch with me if you would like to sell it.
License
Comment & Rating (18)