Search models, users, collections, and posts
Oral B Toothbrush Holder V2
IP Report
Print Profile(12)
50mm with bracket, 0.2mm layer, 2 walls, 15% infill, support for bracket
Designer
2.7 h
1 plate
52mm with bracket, 0.2mm layer, 2 walls, 15% infill
Designer
2.7 h
1 plate
54mm with bracket, 0.2mm layer, 2 walls, 15% infill
Designer
2.8 h
1 plate
56mm with bracket, 0.2mm layer, 2 walls, 15% infill
Designer
2.8 h
1 plate
Click to see more
Open in Bambu Studio
Boost
3
9
0
0
4
0
Released
Description
Holder to hang two Oral B toothbrush heads without the water running into the heads. A glass can be placed under the holder.
I made a model package that is attached to a board with the bracket and a model package that stands on the table. There are suitable models for glasses with a diameter of 50 - 60 mm. Other diameters are also possible on request.
Improvements to V1:
- added an own bracked model
- better ratio of stiffness to mass
- optical improvements
- added model package to stand on the table
Printing parameters:
- Material: PLA / PETG
- Layer height: 0.2 mm
→ Maybe lower for the screw and the bracket due to the thread. Depends on the printer quality. Mine worked fine with 0.2 on a BambuLab X1C. - Support only needed for the bracket (see last picture, overhangs in the stand max. 60°)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)