Mario Super Star Wall Decor (No AMS)

Here is a Mario themed wall art / decoration that is multipart and thus requires no AMS to print. The 3MF file contains the parts labeled by color and oriented properly to give the best front facing finish. Each frame has a hook on the back if you wish to hang on the wall. 

The fit on the parts have a little bit of tolerance so can fit them in without issue but if slightly loose, use a dab of glue to secure. I personally prefer to error on that side vs having someone spend their time and filament printing something that then will not fit together as has happened to me with other’s models. 

I made it where the back can be printed split so the face is on the plate and thus has a better surface finish. The pins align to push it together but consider using a couple drops of glue as well to help with lateral forces. My print pictures did not use this one as I modified afterwards for this option. Also note that on some of the models doing this has resulted in Bambu Studio reporting some non-manifold edges. I am not sure why says this and some do not repair using Windows service but print just fine. Ignore message if you see. 

Materials Used:

Ele-goo Black

Ele-goo White

Kingroon Yellow

Other Mario wall art models:

Mario Thwomp Wall Decor (No AMS)

Mario Mushroom Wall Decor (No AMS)   

Mario Fire Flower Wall Decor (No AMS) 

Mario Coin Wall Decor (No AMS) 

Mario Cheep-Cheep Wall Decor (No AMS) 

Mario Bob-omb Wall Decor (No AMS) 

=======================================================================

You can also support me on Patreon and also to obtain permission for commercial use:

https://www.patreon.com/sageprintsanddesign