Makita DC18RC Charger Holder, French Cleat or Wall Mount
Print Profile(2)
Description
12.01.2026 New Version V2:
In this version, I changed the bevel to 30° and made the pins that hold the charger screwable. For this, you need 4 socket head cap screws DIN 912 - M3x20. This allows them to be adjusted (by scaling) to compensate for possible tolerances.
******************************************************************
This is a holder for a Makita charger type DC18RC. It is suitable for both a French cleat wall and simple wall mounting. To mount the charger onto the pins, the rubber feet must be removed. These can be placed into the holder for storage. The holder is secured to the French cleat rail with a clamping piece. This is not needed for wall mounting. The French cleat rail is attached to the back with 2x socket head cap screws DIN 912 M5x10. An M5x20 hex head screw is required for the star knob. To prevent it from pushing out, the cover washer must be glued on with superglue. The screws form their own thread when screwed in.
Boost Me (for free)
If you like the design, I would appreciate it if you could support me with a boost or two.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)