wall / desk clock baltic sea Lighthouse

https://makerworld.com/en/collections/4639439-licensed-models

You can sell this model, and all the models in the link above, 
with a membership on Patreon.
www.patreon.com/cP_3D

I have made another clock here. Maybe some of you also like this clock.
I could imagine that this watch would also be a very great gift for someone.

I created a version with 170 mm and 245 mm for wall and table

If you would like to get others excited about these wall clocks, please share the link on social media.

Here you will only find the dials!
You can find the necessary accessories under the following link:

https://makerworld.com/en/collections/4894074

To minimize print time without compromising quality, I configured height range modifiers in my print profiles. So don't be surprised if the swap instructions don't match the data in the print profile

Print at 100% infill with a layer height of 0.06mm with a base layer of 0.12mm

Swap Instructions:
    Start with Black
    At layer #19 (1.2mm) swap to Jade White
    At layer #29 (1.8mm) swap to Black
    At layer #30 (1.86mm) swap to Red for the rest.

If you get the message with the floating regions when slicing... you can ignore this
 

Here you can find my other dials collected
https://makerworld.com/en/collections/1715414