Printed without issues. my daughter wanted it in all gray so shel could colour it herself. 

Flemming

0.2mm layer, 2 walls, 15% infill

This is a really detailed model.  The kids love these!  We mixed and matched different colors for great results. 

ksp420

Excellent print. Everything snaps together perfectly. 

LeoHeart

The key ring part is a bit to thin tbh. I dropped it once while I was assembling it, and it broke, so had to print a new one.

emilskibsted

mfwic

Smonstr Studio

PantherMadCat

upeppe

Skibidi

Plainjane

EZWorld

cover

IMG_20240109_204832_47dc29da-b727-41a4-a837-8487c16ee970.jpg

IMG_20240109_204912_3a2154ea-e416-423a-b7d1-ffc5733eeba5.jpg

IMG_20240109_211657_382d8853-4497-4dce-84f9-01f8805b287a.jpg

plate_1.png

IMG_20240109_220435_6a54e543-b3e6-423b-8e27-b59f2cebdf44.webp

Globally 0.2mm Standard @BBL X1C is selected.For the lower body, brim and organic tree support (15 degree threashold angle) are suggested.For the upper body, similar organic tree support (15 degree threashold angle) is suggested and variable layer height is prefered to have a smoother finish.For the bone, brim and organic tree support (20 degree threashold angle) are suggested.

I revised <a target="_blank" href="https://makerworld.com/zh/models/123973#profileId-133565" rel="nofollow noopener">the Among us model</a> to include a ring for keychain just in case one wants to attach it to a backpack or something. The joint of the upper and lower body were also modified a bit (not visible after printing out though) to have a better connection of the two parts.

Print Profile(1)

Description

Comment & Rating (19)

License

Related Models

Among us figure (keychain)

Print Profile(1)

Description

Comment & Rating (19)

License

Related Models