1.5in (38.3mm) and 2in (50.8mm) Multiboard Cup by Daboo Designs LLC

Daboo Designs LLC

Tools>Organizers

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

1.8 h

2 plates

4.7(9)

Boost

102

Released

Description

Here are a couple of cups for your organizing pleasure.
1.5in (38.3mm) diameter x 2.36in (60mm) tall - updated to improve hanging
2in (50.8mm) diameter x 2.36in (60mm) tall

Perfect for holding random jeweler screwdrivers, Allen wrenches, q-tips, or other small items that are a pain to keep up with.

Print upright with no supports at 0.2mm layer height with three walls for optimal strength.
Each Cup Requires 1 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.

Comment & Rating (9)

@Maddas

Print Profile

0.2mm layer, 3 walls, 15% infill

Alles top 👍

@eried

Print Profile

0.2mm layer, 3 walls, 15% infill

awesome, thanks, maybe it would be nice with a drain :) and openings to see what is inside

@The_Trap__

Print Profile

0.2mm layer, 3 walls, 15% infill

Works great so far! Thx for the modell. I would prefer a thicker part in the back to hide the bolt. So you could use a t-bolt with cover for example.

@user_3747175925

Print Profile

0.2mm layer, 3 walls, 15% infill

@fecub

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

@cormar

Print Profile

0.2mm layer, 3 walls, 15% infill

@Cherno

Print Profile

0.2mm layer, 3 walls, 15% infill

@GearsOfDarkness

Print Profile

0.2mm layer, 3 walls, 15% infill

Other Issues:Hard to mount The print is a good one - very clever. The only issue is mounting to the multiboard is difficult. The T Screws are too large for this design.