TCL GTV Remote Control Cover (Model RC902N) - Free 3D Print Model

Search models, users, collections, and posts

morales07302

Household>Other House Models

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

Designer

1 h

1 plate

4.8(9)

Open in Bambu Studio

Boost

115

333

211

Released

Description

Remote control battery cover for the TCL google TV remote control model RC902N. Fits nice, locks in place on its own, and looks pretty good. I used an A1 mini with a .2mm nozzle on the .06 fine preset. I also had supports on to help with the fillets around the outside face of the cover.

remote control

battery

battery cover

battery cover replacement

Comment & Rating (13)

@user_3634930230

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

Worked pretty well, thank you!

@user_2477079839

Dimensions are right but the lock-in tab doesn't work (needs more complexity) and the tabs on the rear need to move down slightly (not flush with the battery cover lid). Printed it same way you have it presented here and I think that was a mistake, the sides are too thin & crack easy on 3 walls. I'll have to reorient it, try with 4 walls, and move the tabs down a little bit.

@vdavidm

The lace tab error happened to me too, if you fixed it please let us know, with three walls it is very fragile, but for now it works better than the one that broke

Show original

@fisherbrad922

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

Printed in ABS. Came out so so, but it's a difficult print to orient.

The profile uploader has replied

@morales07302

nice. I actually slightly adjusted the model a bit to get rid of some thin sections but I forgot to upload it. I made it in PETG recently and it's holding up nice. I'll update the file soon.

(Edited)

@TSAM1

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

Worked well!

@elliott.scott.r

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

did not fit. thanks anyway. mine is deeper.

@DannyRosa

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

@vdavidm

It is the best

Show original

@user_4274473207

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

@cotherncustom

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

@user_3872511322

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

@user_3281539957

Print Profile

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.