Reolink D340 Doorbell Holder Anti-theft

There are many designs available for the Reolink D340, but I couldn’t quite find what I needed; so I created my own.

This is a custom Reolink Doorbell holder with an integrated rain cover. It comes in three versions: flat, 15° angled to the left, and 15° angled to the right. Designed for outdoor use and easy installation.

Key Features:

• Three versions: flat, 15° left, and 15° right
• Built-in rain cover to help prevent rain from seeping in behind the doorbell
• Anti-theft design: uses an M2 x 6mm screw. Once removed, you can access a small release hole to remove the doorbell using a thin object like a SIM pin
• Easy to install:
  • Place the original Reolink metal plate onto the holder, using the small guiding pins
  • Secure with the two screws provided by Reolink, this also mounts the holder to the wall or door frame
  • Snap the Reolink doorbell into the holder

Print Recommendations:

• Infill: 20% for durability
• Layer Height: 0.16 mm (especially for the angled versions at 0.2 mm, layer lines are more visible)
• Material: PETG or ABS (recommended for outdoor use)
• No supports needed