Old Nail - Hollow Knight
Print Profile(3)
Description
This is the old/default version of the Nail from Hollow Knight
Instructions:
Print with standard supports and disable brim
I used 15% infill; I would not drop below 10% because that could decrease the strength of the assembly dramatically
Print all parts vertically
The blade and the tip require a very small amount of sanding to make it a friction fit.
Filament glue is recommended for putting the pieces together.
Once everything is assembled, I've found that no matter how hard I swing it, the nail stays perfectly intact
The very top is delicate and will break off if you aren't careful.
I would recommend breaking roughly ¼ inch of the top and using a knife to whittle the top to a more stable tip
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (78)