Fuzzy Skin Test Hexagon - Free 3D Print Model

Search models, users, collections, and posts

schiko

3D Printer>Test Models

IP Report

Print Profile(1)

All

X1 Carbon

P1P

A1 mini

P1S

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

50 min

1 plate

4.9(37)

Open in Bambu Studio

Boost

123

298

232

Released

Description

There are a lot of models for test prints of different fuzzy skin options generated by the slicer, but they are often too big, so they need a lot of time and filament to print.

I find the best settings are when the skin point distance has the same value as the thickness of the fuzzy skin.

So I made a small model with 6 different patterns of fuzzy skin options: 0.1-0.6mm with distance = thickness.

It only needs about 15g of filament and is printed in about 50 minutes on a modern printer.

Scalable down to 75% which reduces time and filament to about 50%, but I prefer the original size.

Comment & Rating (37)

@Dogfinity

Print Profile

0.2mm layer, 2 walls, 10% infill

works as expected. Thank you

@herrderlage7

Print Profile

0.2mm layer, 2 walls, 10% infill

What an ingenious device. It has assisted me countless times in discerning the optimal wall placement! The fuzzy skin feature is truly exceptional

Show original

@user_52329374

Print Profile

0.2mm layer, 2 walls, 10% infill

nice size for really being able to see the effect. I made 5. one for each type of fuzzy to see the differences.

@emirsari

Print Profile

0.2mm layer, 2 walls, 10% infill

just perfect, I use them all the time. printed two with Esun PLA+ one in white, one in black. Any time I need to feel and see the looks of a fuzzy skin for a new print, I make use of these. Thank you, brilliantly thought.