Search models, users, collections, and posts
Ferrari Formula 1 Team Emblem [WITH SPONSORS]
Print Profile(3)
![[FERRARI EMBLEM ONLY] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US8165a4c0cbc60f/277066900/instance/2025-04-15_d95dcb56b8c7b.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[FERRARI EMBLEM ONLY] 0.2mm layer, 2 walls, 15% infill
Designer
8.3 h
4 plates
![[65% - A1 Mini compatible] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US8165a4c0cbc60f/277154359/instance/2025-04-15_c438394630a5a.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[65% - A1 Mini compatible] 0.2mm layer, 2 walls, 15% infill
Designer
4.2 h
4 plates
![[SPONSORS] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US8165a4c0cbc60f/277066443/instance/2025-04-15_a4a584bf22287.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[SPONSORS] 0.2mm layer, 2 walls, 15% infill
Designer
11.1 h
5 plates
Open in Bambu Studio
Boost
297
712
39
12
867
256
Released
Description
🏎️ -- SCUDERIA FERRARI EMBLEM WALL ART -- 🏎️
This can be printed all on one plate. It requires the AMS for fine details such as the white accents within the ferrari horse. The full thing can be printed in 4 plates and will require 5 colours.
I recommend using the bambu filaments as they seem to work best. Also I'd recommend printing with a brim unless you have an enclosed printer like the P1S or X1.
On the back is a keyhole mounting point so a single mount on the wall is effective to hook it up!
The total model weighs just over 200g.
📐 The Ferrari emblem measures 15cm by 25cm with each sponsor logo measuring approximately 9cm by 9cm! 📐
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (39)