Search models, users, collections, and posts

In-Case-Of-Banana

Print Profile(1)

All
A1 mini
P1S
A1
P1P
H2D
X1
X1 Carbon
X1E
H2D Pro
H2S
P2S
H2C
X2D
A2L

Regular and smaller sizes, 0.2 nozzle, 10% infill
Regular and smaller sizes, 0.2 nozzle, 10% infill
Designer
8.6 h
2 plates
4.5(4)

Open in Bambu Studio
Boost
24
63
5
6
62
33
Released 

Description

BANANA vs BACKPACK 1-0

You've reached your well-deserved break after hours of walking, opened your backpack to refresh yourself and... Ugh, the banana is squashed again!

 

In case of bananas in danger, trust the Hexagonal Pine Nut and print an In-Case-Of-Banana too!

 

"But bananas are not all the same, mine will never fit in", you might say.
No problem! Thanks to its constant curvature and spacious internal radius, no banana will be left with a destroyed peel.

 

"Spacious internal radius!? This box is giant", is another possible objection.
And here too, trust the most hexagonal Pine Nut ever: you can choose whether to print the regular box or the smaller one!

 

The radius of curvature is different for the two versions:
just as smaller bananas are more curved, so too the smaller box will have a smaller radius of curvature.

 

----------------------------------------------------------------------

FOOLPROOF ASSEMBLY

  1. Get your favorite banana from the pantry.
  2. Open your In-Case-Of-Banana by removing the elastic from the hooks at the ends.
  3. Insert the tasty fruit into the internal part "BananIN", making sure the stem comes out.
  4. Close the box with the external part "BananOUT" and apply the elastic between the hooks at the ends.

 

I recommend using a rubber band to close the box, but you can also do without it. It's up to you.
Also, if your backpack is particularly full, you can use one as well as more rubber bands to tie it dangling to the straps. Or, slip the case into a pocket for water bottles.

 

----------------------------------------------------------------------

PRINT PROFILE OVERVIEW

  1. Regular size (inner diameter 50mm, up to 240mm end-to-end)
  2. Smaller size (inner diameter 45mm, up to 180mm end-to-end)

Both the spotted peel and the text on the case are negative modifiers: you can choose to remove them in the slicer.

----------------------------------------------------------------------

FILAMENT USED:

Overture PLA plus - yellow;
Overture PLA plus - light green;
eSun PLA plus - brown.

 

----------------------------------------------------------------------

 

Boost Me (for free)

If you've read this far, there's only one more thing you can do...

 

Have a beautiful vitamine source!

 

And now let's imagine hexagonal pine nuts…

--------------------------------------------------------------------------------

 

Have a nice print!

 

And now let's imagine hexagonal pine nuts…

 

Boost Me (for free)

Don't forget to kiss the cook

Comment & Rating (5)

(0/1000)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.