Mammotion Luba 1 & 2 rear spoiler/wing.

Luba Rear Wing Spoiler – Because Your Lawn Deserves Motorsport Vibes
 

Give your Mammotion Luba the Formula 1 treatment with this completely non-functional, 100% stylish rear wing. It won’t make your grass shorter any faster, but it will make your mower look like it just set pole position for the Grand Prix of Backyardia.
 

Installation (Yes, I'm serious about this part):

1. Spoiler Assembly
   The spoiler comes in two parts, connected via a dovetail joint. Apply a small amount of superglue to the joint and press the two halves together firmly.
2. Clamp it Down
   Slide the included clamp over the dovetail joint for added strength and style. A small amount of glue will keep it in place permanently.
3. Attach the Mounting Brackets
   Glue the two mounting brackets under the spoiler. Let everything cure properly before the next step.
4. Mounting to the Luba
   Use strong double-sided tape to attach the assembled spoiler to the back of your Luba. For best results (and to avoid any collisions), do this while the mower is docked in its charging station.

Note: This mod is for looks only – no downforce was harmed (or created) in the making of this design. :)

Whether you're cutting corners or cutting grass, make sure you look fast doing it.

Print in a material of your choice, ABS, PETG, ASA och PLA for example.