608 Ball Bearing - Smooth

608 Ball Bearing - Smooth:

This is a very smooth 608 ball bearing, using a non-symmetrical design. Reasonable tolerances allow it to rotate smoothly right after printing, and it is easy to print.

Precautions:

1.Since this is a small part, please ensure the build plate is clean before printing, to prevent spaghetti, and ensure the filament is dry to reduce stringing;

2.Never print with glue, this will cause the bearing to not rotate smoothly;

3.Immediately after printing, there may be some ball bearings sticking together. Press them with your fingernail and gently pry them apart. If some are still difficult to separate, use a small knife to pry them apart;

4.It will be a little dry when it is just printed. Rotate the shaft in your palm several times, and you will get a smooth 608 bearing.