Bamboo Shoot Launcher Slingshot Release Clip
Print Profile(2)
Description
This rubber band shooter utilizes 2020 aluminum extrusion for the barrel, incorporating a Bluebird slingshot launcher head, launcher mount, and release mechanism, employing flat rubber bands.
Assembly instructions can be found on Bilibili, search for 匠心智作.
【Rubber Band Shooter Bluebird Slingshot Assembly Guide】https://youtu.be/p0tKjpBa5a0
Required materials are listed below:
| Specification | Quantity | |
| Screws | M4x18 | 5 |
| M4x14 | 2 | |
| M4x8 | 1 | |
| M3x16 (Countersunk screws recommended) | 2 | |
| M3x6 | 1 | |
| 20 Aluminum Extrusion T-Slot Nut and Bolt M5x10 | 1 Set | |
| Nuts | 20 Aluminum Extrusion Slider Nut M4 | 1 |
| M4 | 1 | |
| M3 | 3 | |
| Washers | M3x9 | 2 |
| Dowel Pins | M4 | 1 |
| Springs | 0.5x3x50 (Cut into 25 and 12mm lengths) | 1 |
| Aluminum Extrusion | 2020 type, length arbitrary, groove width 4.4mm, groove pitch: 13mm, groove length 24mm | 1 |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)