mobiobi

cover

2023-08-15_wtpsyn7kk5uz.jpg

H145 118 BO Body Left

plate_1.png

H145 118 BO Body Right

plate_2.png

Horizontal Stabilizer

plate_3.png

Rotor

plate_4.png

Skid Left and Right

plate_5.png

Rear and Front Crosstube

plate_6.png

Docbrown

IMG_5511.jpeg

Photo2.jpeg

Photo3.jpeg

IMG_5513.jpeg

IMG_5512.jpeg

<ul><li>IMPORTANT: the original design was enlarged by 130% the final dimensions are 226x228x22 and the rotor 252x252x6</li><li>0.20 mm layer height or lower as desired. </li><li>Print without supports.</li><li>the colors chosen to represent the original Bologna rescue helicopter 118 is yellow but you can remove or change it to your liking. IMPORTANT: please consider the waste.</li><li>The horizontal stabilizer is best cut in two and installed with glue. </li><li>The skids and crosstube tubes you can also print it in one plate.  </li></ul>

0.2mm layer, 2 walls, 15% infill with AMS

No support required, recommend 0.15mm layers or less. Maybe slide the horizontal stab all the way through the holes one sides at a time to make sure it fits.Put heavy things in the inside hidden square holes, nuts&bolts, metal, etc to counter balance the tail.Glue the sides together, using filament pieces as alignment pins in the 3 holes. Glue on cross-tubes(longer one in the front) and then skids. One more pin in the middle of the Fenestron..Step/.f3d files for mods.

Airbus H145 Helicopter

ASIA

Print Profile(1)

Description

Comment & Rating (13)

License

Related Models