Handfile/Fingerfile for climbing
Print Profile(1)
Description
A simple file to sand down calluses and skin tears, mainly for use in climbing/bouldering. Can of course be used in other fields of application. It comes with a snap-on cover to protect it from outside influences, in my case chalk dust.
Additional required parts:
- Some form of sand paper (grade of your choice)
- Glue
The sandpaper has to be appropriately cut and applied (glued) to the printed part. It should not be thicker than 1 mm, otherwise it may interfere with the cover. The area for the sandpaper is ~73mm length and ~20mm width
 |  | 
|
The file is designed with a slight curve in longitudinal direction and a curve, flat part and and edge in the cross-section for better sanding properties on small areas, i.e. fingers. (see the last two pictures). My version is printed in PETG but PLA should be no problem since the bending parts are not under load when stored.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)