League of Legends Garen Feather Knight

Garen Feather Knight model / Wind-up toy

Garen's April Fool's skin is so fun, but unfortunately I always fail to get it randomly in the All-Random Ultra Rapid Fire mode, so I had no choice but to print one QAQ

It is not recommended to use Silk White for printing.

Because I didn't have regular white filament, I used silk white, and the result looks a bit strange.

I will update the effect picture after my white filament arrives.

Although I limited the colors to four for multicolor printing, I would recommend hand-painting, which saves materials and produces better results.

Plate 01 and Plate 03 require modification of the wind-up mechanism for proper installation, this is to prevent the wind-up mechanism from obstructing Garen's greatsword.

Plate 05 and Plate 06 do not require modification of the wind-up mechanism, but Garen's sword-holding hand will become the left hand.

The wind-up mechanism modification tutorial is as follows:

1. First pry open the wind-up mechanism

   

2. Drill holes in the parts inside the wind-up mechanism

   

   

3. Adjust the position of the wind-up torsion pin

   

4. Reassemble the wind-up tool

   

5. Wrap with tape

   

Thus, the original torsion wrench on the left side of the wind-up mechanism is moved to the right side, allowing for the normal operation of Plate 01 and Plate 03.

Model relies on components Tuozhu Self-Walking Core MD001