A1 AMS Hub Lite Mod with Mount 5-Hole Version

If you like it, I'd appreciate your comments and a boost :-)

This is a new version of my existing AMS Hub Lite holder in the 5-hole version for an additional external PTFE tube for the original AMS Hub. After I tried several times to integrate a Y-adapter and none really worked well, I decided to go a different way. And what can I say, this one actually works really well
First, there is the holder with a fifth hole in the middle. In addition, a new inlet for the original AMS Hub. Only the head needs to be removed, the inner guide removed and replaced by my 5-hole adapter until it clicks into place. Everything can also be undone. I have tested all feeds multiple times and each of the 5 inlets works perfectly. I recommend installing the external PTFE in the middle for TPU printing. The PTFE feed tubes must be pushed in with some force. But they also won't slip out. I also redesigned the retaining clip a bit so it holds even better. As always, I am open to suggestions and updates. I spent some time with testing and hope the result can convince you. Have fun and happy printing 

Watch out my new design for Panda Knomi:

Panda Knomi Display Cover and Swiveling Front by 3D Imagination MakerWorld: Download Free 3D Models

If you are looking for the chain i used, here you will find the link:

DIAMOND BACK A1 drag chain (for A1 & A1 mini) by 3D Prince MakerWorld: Download Free 3D Models