Razor/Shaver Holder
Print Profile(3)
Bill of Materials
Description
Boost Me (for free)
If this has been useful for you, please remember to rate, review and leave a boost. Thank you.
Curved razor mount, with a small roof to prevent the smoothing gel edge from getting unnecessarily wet when not in use.
The file prints with a small single layer of support underneath creating a slim recess with a rough texture (remember to remove the support material) for a strip of double-sided tape to mount the print with. The internal supports can be removed easily by pushing back towards the inner curved edge and then down from the top.
Sizing Guide - Please measure your razor to be sure you pick the correct model:
The Standard Version (Plate 1) - Fits a Gillette Mach 3 razor.
There is a Larger Version (Plate 2) in the 3mf file - 120% Scaling.
Need a custom size?
You can use the scaling tool on Plate 3 to get the exact size you need. Simply measure your razor's width (X-Axis of the tool in BambuStudio) and height (Y-Axis of the tool in BambuStudio), and adjust the scaling tool's dimensions to fit (use the larger scaling factor of the two identified when using “uniform scaling” to maintain the original design aesthetic of the model on your custom sized model). Copy this scaling percentage onto the model on Plate 4 and it will be scaled to fit your razor with a small tolerance margin around all sizes.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (130)