Trophy 85 mm height, quick print

Update: 

Added a print profile with a separate base. 

With a separate text block that can be printed flat. This to reduce waste or if you dont have an AMS. To change text right-click on “Text_shape” object in part tree.

Both trophy and text plaque have a tight fit and can be squeezed in place. Careful not to break the trophy

Original description:

A friend described that he was looking for a trophy that could be quick to be print in large numbers for a upcoming youth sports competition, but still would have a nice look to it.

I wanted include some royal crown into the design. 

So tried some design iterations with Freecad and my Bambu P1S and print in Silk Gold/Pink.

With the setting in the file on 0.20 mm Standard parameter, some stringing appeared, but it was easily removed with an heat gun. 

I think this can be reduced if setting a finer system preset (but with longer print time).

I can adjust the model and/or print setting if there is an interest in this design.

Several people have asked to sell my design, so I have set-up a Patreon

If you wish to sell physical prints of this design, you must obtain a valid commercial license. Please find licensing options and membership details on my Patreon page:

https://patreon.com/Digital_Smiley

This file is for personal, non-commercial use only unless a license is purchased.

My page with my other designs:

My page with skadis designs: