Nissan Silvia S14 Gear Boot Repair

A set of Pegs and a Lower Bracket to repair the broken ones that hold a Nissan Silvia S14 gear boot. (May work in other models)

This design has a set of pegs designed to push over the existing moulding above where the pegs commonly snap due to age.

Along with this is an included bracket sized to the pegs to hold the gear boot material to the pegs.

When assembling I would recommend glueing the pegs to your existing moulding, then once the gear boot material is attached to each peg a small dab of glue at the top of each peg to ensure it holds. This set has 5 pegs, 3 for the top and 2 for the bottom as shown in images. No side pegs are required from my testing.

Design can work with an A1 mini if the lower bracket is cut into 2 parts, I would then recommend glue and the soldering the connecting edges to ensure a good connection.

This does not include fixes for snapped clips that hold down the moulding to the center console.

I would recommend printing in PETG for strength.