Battlemace 40M Bolt Action Bolter Human Size Prop

A human size bolt action bolter from battlemace 40 million.

has a removable mag and working bolt, while a bolt action bolter is completely in practical in any level compared to a traditional bolter it still cool which is good enough.

Profile is just my standard print settings, print however you would like, it the pictures ive only use half of the barrel pieces, you can use all of them but they are a bit wonky

should be straight forward to assemble, things to note:

The bolt handle only goes in 1 way, when you have dry fitted the bolt make sure it cycles well before gluing the bolt pin into the bolt its self, do not glue the bolt handle together at all.

dry fit the main body before gluing to insure the bolt is in correctly and is free to cycle, oh and glue to bolter shell in before fully assembling.

i would print the bolt and bolt handle heavy duty so it doesn't break when cycling.

the bolt is quite snug, so if you find it to tight, just scale is down by 1% or so (all piece of the bolt)

if an error come up for the magazine bolts, dont worry it prints fine.