AMS 2 Pro Power Brick Case/Mount
Print Profile(1)
Description
Wanted a way to mount/contain the new AMS 2 Pro's needed power brick up out of the way and still be accessible while attempting to maintain some neatness to the chaos of cables, cords, and tubing.
Found it easiest to first fit the lid onto the case, it is a tight fit. After the lid is attached, sliding it all the way to an open position. I found it best to drill pilot holes prior to screwing the power case to the wall. Once the pilot holes are established, I grabbed 2 wood screws and attached the case in the location and orientation that I desired.
I then attached the power cable to the power brick, once the brick and power cable where snuggly fitted together; slide the lid to the closed position. There should be a slightly satisfying click when the lid is closed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)