Nobrega

cover

CO2_Tube.jpeg

plate_1.png

2025-04-12_17324c9fd429b.jpeg

&nbsp;• 0.2mm layer height;• print without support;• Print with ABS or PETG;• improved strength by wallx4, infill density 35%.

0.2mm layer, 3 walls, 25% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>This support serves for tube of 80 mm of diameter and has nylon screws to adjust the position of the tube. The spindles are 6mm and are positioned at 120 degrees each.</h2>

Print Profile(1)

Description

This support serves for tube of 80 mm of diameter and has nylon screws to adjust the position of the tube. The spindles are 6mm and are positioned at 120 degrees each.

Comment & Rating (3)

License