Ver. 1.5 Feet for 1/100 GN-001 Exia

Model making skills and tools required!

Re-scaled to 1/100, added articulation, and modified original model to fit 1/100 GN-001 Exia and it's variants, to change the foot/leg design to be more in line with the newer sculpts, like the PG/RG/MB, and the other MG 3rd generation gundams. 

Also partly fixes the issue with the MG kits weak toes/ankles, so the model can stand better without needing an action base.

The fixed pose version can be used on both the no-grade 1/100 and Master Grade kits without modification, but has limited articulation.

The articulated version needs a few inches of 3mm runner sections to enable the joint movement. Drill out the holes with a 3mm bit to clean up the openings and insert the 3mm dowel, it should be a tight fit to keep things sturdy. Cut the dowel as flush/flat as you can. Fill the external gaps between the dowel and print with superglue or putty, and sand it smooth.

PC6 from the original kit is reused, use tweezers or pliers to rotate and lock it into place in the bridge piece.

0.2 nozzle isn't really required but it's whats installed on my machine right now, 0.4 prints come out fine too.