Extension cord / cable / winder and organizer
Print Profile(2)
Description
100% 3D-printed cable management tool. Useful for winding cables, preventing tangles, and neatly organized when stored.
Will also work well for ropes, light strips, EV Charge cables and so on.
- No glue required! Snap-in pin design that allows for easy disassembly and reassembly.
- No supports!
- Lightweight yet sturdy
Dimensions:
Original: 410 x 190 x 100 mm (L x W x D) / 16.15 × 7.50 × 4 inches (L × W × D)
Mini (80% scale - A1 Mini Compatible) : 328 x 152 x 80 mm (L x W x D) / 12.92 × 6.0 × 3.2 inches (L × W × D)
Photos with 27.5m (90ft) extension cord (1.5mm/16awg) rolled up (Black/Original version)
Photos with 10m (33ft) extension cord (1.5mm/16awg) rolled up (White/Mini version)
Boost Me (for free)
Please leave a boost if you find this model useful :)
Assembly:
- Slide the 3 rods into one of the end pieces, and secure them with the split pins. 1 long one in center, 2 short ones at the back.
2. Slide the two end holders onto the rods as shown below.
3. Slide the last end piece on top of the 3 rods, and secure it with the split pins. 1 long one in center, 2 short ones at the back.
Documentation (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (215)