Brick Man - Fort Wayne Komets BLACKOUT Jersey
Print Profile(1)
Bill of Materials
Description
Requested by Makerworld User.
Take your BRICKMAN fandom to the next level with 3D printed awesomeness!
Showcase your team spirit with unique and durable 3D printed creations
Team logo Player figurines Intricate details and accurate designs
colours are based on official jerseys.
Print yours today and score big with your friends and fellow fans!
Approximate size when printed is 20cm / 8 inches.
Filament used:
PLA Basic Black (Bambulab)
PLA Basic Jade White (Bambulab)
PLA Basic Orange (Bambulab)
PLA Basic Yellow (Bambulab)
PLA Basic Gray (Bambulab)
PLA Basic Dark Gray (Bambulab)
Printing Details and directions:
Logo Print recommendation is .12mm Fine with ARACHNE wall generator.
All other parts can be printed at .20mm with CLASSIC wall generator.
Supports are only required for the ARMs (plate 2) and HIP (plate 3).
Depending on your setting and adhesion level I would recommend a brim on the hands and arms.
You will need to glue the logo into place after printing it was designed this way to try to have as little poop waste as possible.
If you like what I do and would like to support me or looking for a Commercial License
Check out my membership's.
Happy Printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)