Honkai Star Rail Castorice LC Hueforge

Hello hello,

Good luck everyone pulling for Castorice. Was thinking of doing a hueforge of Castorice with her dragon…. ended up pretty difficult haha. A lot of the art I found are too detailed so it looks kinda bad in hueforge formatting or just skill issue on my part lol. Ended up doing the light cone but still pretty difficult especially with all the transitional colours 

Notes:

• Only scale X and Y dimension, do not change the Z dimension (thickness)

• *Due to Makerworld's stupid slicing limit, please replace the model file with the downloadable STL for HD hueforge,*

   

Filaments Used:
    PLA Bambu PLA Magenta Transmission Distance: 4.5
    PLA BambuLab Basic Black Transmission Distance: 2
    PLA BambuLab Basic Black Purple Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
    Start with Magenta
    At layer #8 (0.72mm) swap to Black
    At layer #11 (0.96mm) swap to Purple
    At layer #16 (1.36mm) swap to Jade White for the rest.
 

Doing a lot of gacha game waifus recently… gonna switch up next time haha. 

Catch ya next time, byeeeeeeee

Edit 1 2025/04/16: I have amended the model, now it doesn't any defects at the base. Sorry about the inconveniences. I would still recommend replacing the stl file since I still need to simplify the stl itself in order to upload to MakerWorld