Search models, users, collections, and posts
Frame for cat scratch board strips
Print Profile(4)
0.2mm layer, 2 walls, 15% infill
Designer
35 min
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
43 min
1 plate
40mm - 0.2mm layer, 2 walls, 15% infill
44 min
1 plate
50mm - 0.2mm layer, 2 walls, 15% infill
53 min
1 plate
Open in Bambu Studio
Boost
351
1331
80
13
787
681
Released
Description
This basic frame holds cardboard strips of width about 31mm together to make cat scratch boards.
Outside dimension is 204mm by 36mm which fits diagonally onto A1mini plates.
You can adjust the length if you have a larger machine and want a wider scratch board.
The bar in the middle is for strengthening the frame so it holds all the strips down.
Carboard strips shown in the picture were made using MartyMaker's Cat Scratch Maker here on maker world.
New print profile uploaded! Large size 304mm by 36mm fits on A1/P1/X1 (256mm*256mm) plates!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (80)