Rexter

cover

489444011_558768253933138_8231119803526884885_n.jpg

487960987_1388204032361419_124414428487628895_n.jpg

Kyosho drx steering servo bracket.jpg

Horizontal layout

plate_1.png

Vertical layout

plate_2.png

2025-04-12_78a5c66e7f5be.jpg

Select which plate you want to print depending on your needs.There is a plate for horizontal, and vertical orientation.

Battery tray, two variants

To make room for the battery, the electronics compartment will have to be removed. This compartment also strengthens the steering servo. So to reinforce the servo again, you can use this bracket as a replacement.

Steering servo bracket

This is a battery tray for doing a brushless conversion for the Kyosho DRX 1:9 gas / nitro RC model car.There are two variants (horizontal, and vertical oriented battery), just select them from the plate for whichever might suit your needs.&nbsp;It will work fine with PLA, but I recommend printing in something stronger like PETG. If you want, play around with some settings if you need it even stronger.Its made for 2S lipo batteries with the following dimensions:H 24mmW 46mmL 135mmBut you might be able to fit other batteries. Also you must have a strap to fasten the battery with.

Kyosho DRX brushless conversion battery tray

ASIA

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models