Activated Carbon Filter Creality K1-K1C_MOD-1
Print Profile(1)
Description
Printed in PLA with a TPU gasket. Used 4 M3 nuts to be inserted on the base with a pause at layer 20.
No Supports.
Attach the base to the rest of the body with 4 M3x8 screws, inserting the gasket between the two objects.
The lid cap can be glued to the lid.
I used a sheet of active carbon cut and doubled inside the filter.
Once everything is assembled, insert it into the back of the printer.
Note that the fitting has a correct direction to enter.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)