AIO FC holder 25,5 x 25,5
Print Profile(1)
Description
reduction 30,5x30,5 to 25,5x25,5
I needed the reducer for a super cheap 5" drone
total price came to 259Euro (including DJI O4)
The reduction is suitable if you have a frame that only has a 30.5 x 30.5 pitch and you want to use AIO FC.
I chose to install diagonally because I installed a DJI O4 above the FC and the cable to the camera is short.
Generally AIO boards are installed in this position.
The picture shows the "problems" :)
There is a collision between the USB and the frame post
There is a collision between the DJI connector and the nut
Both can be solved in multiple ways, using a different nut and attaching an external USB C, since I'm lazy, I removed and reinstalled the column for setup. I removed the nut, attached the connector and reattached the nut.
For the camera, I used a reducer between DJIO4 (small camera) and DJIO3.
https://makerworld.com/en/models/1064311-camera-adapter-dji-o4-to-o3#profileId-1053102
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)