dummy 13 mahoraga head

WARNING this is a pretty tricky print for .4 mm nozzle and the inexperienced read desc. For some tips

The best changes that I made that helped were:

1.  be light and simple with the supports on the wings. tree or normal (idk what it call it just not tree or organic) does not have that big of a difference tho it really depends on your slicer 

2. the wheel is a little better with good bed adhesion and don’t expect the balls to print the best and z hop is very useful on the first layer

3. 0.2 mm nozzle should really only be necessary on the head mainly the wings but should not change much