Simple Spool Holder V2 for IKEA 365+ Dry Box

Spool holder V2 (for IKEA 365+ drybox)

This is my improved version of my simple spool holder for IKEA365+ boxes. 
V1 you can find here: https://makerworld.com/de/models/536417-simple-spool-holder-for-ikea-365-drybox#profileId-453343

• Choose between a round or rectangular hygrometer
• The spool holder can no longer slip
• Holder for 4 silica gel containers with a diameter of 50 mm
• The space inside the box is used perfectly
• Even with the silica gel containers, there is enough room for the filament spools

Silica-Container: You can find the Containers from the pictures here:
https://makerworld.com/de/models/1308835-silica-container-for-storage-inikea365-box#profileId-1342718

Usecase: Storing filament and silicagel without rolling around and of course keeping the filament dry

These filaments fit in:
- 3x 800g-spools from "DasFilament"
- 3x 800g-spools from "Extrudr"
- 2 rolls of: 1kg-"Prusament"
- 2 rolls of: 1kg-"Nobufil"
- 2 rolls of: 1kg-"Bambu-Filament"

Material: I printed it in PLA & PETG & ABSX. All work fine!

you can choose out of Profiles for PLA and PETG with 0.4mm or 0.6mm nozzle

X1C/P1P Printing Note:

Disable filament calibration or remove the purge line immediately after the printer has printed it.
The model is so large that it requires the space occupied by the purge line.

Die Trockenbox finden Sie hier:
https://www.ikea.com/de/de/p/ikea-365-vorratsbehaelter-mit-deckel-rechteckig-kunststoff-s79276760/