Final Fantasy - Choose your party! - NES/Famicom - Free 3D Print Model

Description

Before the four youthful Warriors of Light, the heroes of the story, who each carry one of the darkened crystals, embark on an epic adventure, you must choose their classes/jobs. Why you would want other classes than a Warrior, a Black Belt and Black/White Mages is another question, but here you have the chance to replicate any possible party, even if you love having four Red Mages. Well, you better avoid the thief as it doesn't print really well with a 0.4 nozzle - but should be fine with a 0.2 one.

In case you prefer individual larger models for each class, please visit https://makerworld.com/en/models/1307287-final-fantasy-individual-characters-nes#profileId-1340895.

Layer Map - 1 AMS

Requires 1 AMS with push in place pieces. You can use glue to make the pieces secure, but is not required if you want to change the party composition at any point. Note how the inner frame has a small slot for easier extraction (using a screwdriver, for instance).
Includes a plate for the frame (with a crystal), a plate for the subframe, a plate for the red/white characters and a plate for the blue/green ones. Ah, and an additional one for the finger cursor.
IMPORTANT:
- The Warrior/White Mage/Red Mage are simple 4 color prints.
- The BBelt, Thief and Black Mage are 5 color ones. It is recommended to set the clear blue in the same slot as the dark blue and just change them at the set pause.
- All characters and the cursor have an additional pause that may be used to insert a magnet (round 6x2mm or less) into any character(s) and into the finger cursor. If included, then you'll be able to set the cursor on your favourite class. That is enterely optional, so if you don't want to use magnets you can simply remove the pause or skip it doing nothing.
- As said, the thief doesn't print well in this scale with the 0.4 nozzle.

Colors used