Customizable Occupied/Vacant Sign Door Indicator - Free 3D Print Model

Search models, users, collections, and posts

Chris

Household>Decor

IP Report

GIF

Print Profile(1)

All

P1P

P1S

X1E

H2D

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.9 h

2 plates

4.9(44)

Open in Bambu Studio

Boost

110

351

780

421

Released

Description

Content has been automatically translated.

Show original

This customizable occupied/vacant sign is perfect for meeting room, home office, bathroom, or other private area doors. The sliding mechanism instantly indicates whether the room is free or occupied.

The model comprises several parts and allows for individual color customization. Text, text size, and font can also be adjusted in Bambu Studio or Orca Slicer.

Simply open the model, right-click on the text, select “Edit Text,” and then adjust in the upper right corner. Enjoy!

Printing is easy, quick, and requires no support structures.

Information:

Depending on your filament's behavior, inserting the rear plates might be slightly more challenging, but should still be possible without force. If necessary, gently tap them in. The slider should move smoothly. The side cover should fit snugly with slight pressure.
The base is printed on its side without a brim. It's not necessary. However, you need to ensure your print bed is perfectly clean and provides good adhesion. Should the print detach, activate the skirt or use 3D printing adhesive.

Comment & Rating (63)

@Sonja_3D

Boosted

Your file is really great! I also made some signs for the office. two rails make the whole thing very smooth. Thanks!

The designer has replied

Show original

@Cross213

very chic. thank you very much for the rating and boost ✌️

Show original

@Sonja_3D

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you for the file! I modified it a bit. The sign will be placed on the dishwashers at work. It's a good size, the print is great, everything is super👍🏻

The profile uploader has replied

Show original

@Cross213

top! thank you for the rating 👍

(Edited)

Show original

@Live3DLife

Boosted

It was a challenge to put the 2 signs into the bottom slider. I had to sand a bit the sides then I’ve put a bit fat that slides better. but eventually made it. the black top cover slider loves very good and I didn’t had to do nothing to it. the side cover don’t fit well. so I’ve cut the 2 pins to make place and glue it together. Thanks for the model. 🎩

The designer has replied

@Cross213

Thank you for the rating. Yes, it's possible that the back two are very difficult to move. As I said, colored filament can behave a bit differently. For example, only the red one was too stiff for me. The green one, from another brand, slid in easily.

Show original

@Live3DLife

Boosted

Replying to @Cross213 :

interesting. Thanks again ! 🎩

Show original

@user_2083843087

Works great Thanks

The designer has replied

Show original

@Cross213

I am pleased, thank you

Show original

@mweed42

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed perfectly. The green slid in nicely, but the red was very stubborn. But once together it works great.

The profile uploader has replied

@Cross213

Thank you very much for your feedback! 😊 I’ve actually noticed the same thing — the red PLA does seem a bit wider. It kind of feels like red PLA tends to swell or expand slightly.

@WireHD

Print Profile

0.2mm layer, 2 walls, 15% infill

I have redesigned the button for adhesion, resulting in a truly first-rate design

The profile uploader has replied

Show original

@Cross213

Very cool, thank you very much and have fun with it

Show original

@user_3121931796

Print Profile

0.2mm layer, 2 walls, 15% infill

Printing works great. A bit tight when inserting the green and red plate

The profile uploader has replied

Show original

@Cross213

Yes, that's right I also mentioned it in the description Depending on the filament manufacturer and color it can be tighter or looser

Show original

@user_3121931796

I had PLA Basic from Bambu for black and green, for red I used esun PLA

Show original

@chris_D

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you for the template Unfortunately it's too large for my use

The profile uploader has replied

Show original

@Cross213

It's a pity. Unfortunately, the whole thing is difficult to scale, so it's not an alternative solution. Still, thanks for the review

(Edited)

Show original

@chris_D

Replying to @Cross213 :

Yes I tried that I tried for a really long time but unfortunately couldn't scale it properly to my needed size The plates were great but the case unfortunately proved to be too stubborn

Show original

@Piotek85

Print Profile

0.2mm layer, 2 walls, 15% infill

Super. I like it

The profile uploader has replied

Show original

@Cross213

Many thanks ✌️

Show original

@imhotep07

Print Profile

0.2mm layer, 2 walls, 15% infill

An exceptional model, it printed with extraordinary ease and functions flawlessly

The profile uploader has replied

Show original

@Cross213

I am pleased, thank you

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

WC Bad Schild

PrintManufaktur

1.1 k

429

Ortsausgangsschild Rente

SeppelDruckt

716

237

Dog Name Tags

Finn

842

167

A warm welcome - Türkish wreath

NeuSas

633

340