Phone Tripod Mount
Remixed by
Copyright Claim
Phone Tripod Mount
Remixed by
Boost
8
26
9
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
1.2 h
1 plate
Open in Bambu Studio
Boost
8
26
9
0
77
59
Released
Description
I originally printed the model I remixed this from but the threads would split so I added a nut and bolt instead. M4 16mm bolt and two M4 nuts are required.
It has a thread at the bottom that screws onto a standard tripod screw. I didn't have any inserts but after testing the printed threads it's on there pretty good so inserts are not needed.
Comment & Rating (9)
All
Printed wonderfully and grips the phone in a case very tightly. IMHO this is an excellent design and the M4 bolt addition is an intelligent choice.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Works like a charm!
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Printed well from PETG.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
No more
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld