Faucet Handle - Free 3D Print Model

Search models, users, collections, and posts

Household>Other House Models

IP Report

Print Profile(1)

All

A1 mini

X1 Carbon

X1E

H2D

P1S

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 80% infill

Designer

1.6 h

2 plates

4.8(8)

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

The model has undergone minor refinements

The handle and screws are intended for separate printing; if screws are required, please print plate [2]. Given their diminutive size, the screws may present printing challenges; therefore, I humbly request that you refrain from leaving negative feedback concerning them

My household faucet having become inoperable, I meticulously crafted this model as a faithful replica of the original fixture

My mother will no longer assert that my 3D printer is an unavailing device

This is suitable for 40 mixer faucets featuring a 10mm valve core aperture

As this was intended for personal utility, the infill density is set relatively high at 80%. While this only marginally exceeds the material consumption of a 50% infill, I advise against using anything less than 50%

Additional hardware components, specifically screws and nuts, are requisite

Alternatively, the screws and nuts provided within the model itself may be 3D printed

Select either hexagonal or slotted screws contingent upon your available tools. Please note that the printed screws are designed in two parts and necessitate adhesive for assembly

Refrain from printing with PLA

Boost Me (for free)

Your generous support is greatly appreciated

Comment & Rating (10)

@user_482533585

Boosted

I used the original screw to fit the printed nut. They worker perfectly. The transparent PETG matches stainless steel well. Thank you for the design.

@tempesta72

Print Profile

0.2mm layer, 3 walls, 80% infill

perfetto in tutto

@Rastokosice

Print Profile

0.2mm layer, 3 walls, 80% infill

super

@user_2358337461

Boosted

Thank you. Could not find a cheap replacement till I can have time for the sink to be changed. This worked better than the original one. :)

@user_2358337461

Boosted

Print Profile

0.2mm layer, 3 walls, 80% infill

worked perfect.

@user_4207717529

Print Profile

0.2mm layer, 3 walls, 80% infill

...a splendid project the only flaw noted is the slightly excessive thickness of the nut and the two screws it is advisable to use commercially available nuts and screws for optimal results

Show original

@Tompy

Print Profile

0.2mm layer, 3 walls, 80% infill

Does exactly what it says. only the nut did not fit, but we've used a steel nut and bolt. so not a real issue.

@user_4014344883

Print Profile

0.2mm layer, 3 walls, 80% infill

@LordVormulac

Boosted

Print Profile

0.2mm layer, 3 walls, 80% infill

@user_2887398469

Print Profile

0.2mm layer, 3 walls, 80% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models