Device Arm Wall Mount - Fitting most device arms

A simple adapter you can screw on a wall, cabinet or everything you like, so you can put one of these device arms in there. 

I printed it with the adapter-hole to the print plate to make it a little more sturdy (PETG with 15% gyroid Infill and 4 walls). Use some washers if you are afraid of breaking it while screwing it to the wall. 

The adapter‘s hole has a diameter of 12,2mm. If you need it bigger, you can try to print at a bigger scale (or try my older model that uses a 12.29mm hole)

If you are interested in the other printed objects in the pictures, you can find them on here:
 

• Kindle Paperwhite 5 (11th Gen) TPU Case with QI Charging
• Kindle Paperwhite 4 (10th Gen) TPU Case with QI Charging (not in picture)
• Kindle wireless charging dock (for my 11th gen case, will also work with 10th gen if aligned to the side)
• LED Lamp (not my design, but I really like it) 

If you are like me and want to use this while reading, I suggest getting one of these kindle page turners for optimal lazyness ;)