printed in tpu 95a as suggested. tried taking it off my pei plate and the bottom layer peeled off so now air escapes whenever i squeeze.

Sir Mango

TPU Air Blower - 1 Material profile (TPU)

sounds like your tpu is wet. try drying it and printing

A1 mini user

Printed on H2D with Bambu Matte PLA and TPU 90A.  First time printing with multiple materials/colors with the PLA on the left and TPU on the right ... thanks for a good model to test that out :-).  Worked as intended but maybe you might consider trying to hide the seam a bit better.  

saundebn

TPU Air Blower - 2 Materials H2D profile (TPU and PLA)

Der Druck lief problemlos mit TPU 90A und habe gleich noch ein Zweites gedruckt für meinen Kumpel! 😊

The print ran without problems with TPU 90A and I immediately printed a second one for my buddy! 😊

Der___Hamburger

cool looking model, printed perfectly. ams version is kinda wasteful when you compare prime tower to model. valve in the bottom doesn’t close properly, so a lot of air pressure is lost. therefor -1 star.

hardwarepoint

3D WRLD

Great model. Printed perfectly on H2D with Bambu 90A TPU and Bambu basic PLA

Burtonownz

printed the whole model with TPU, no issues 

MorSquare3d

C's 3D Adventure

Came out pretty good. There was a little bit of weakness on the layers where it was printing TPU and PLA even though they were using separate nozzles. Not sure exactly why. 

jetpad

This was created before the H2C, but I assume the H2D print profile can be downloaded and then changed to H2C. There weren't any odd changes to the profile that would affect the H2C. 

Mike Jackson

I haven't tried it, but I would assume it can be printed directly from Handy if you can adjust the filament to match what you have.  

cover

Blower.jpg

20250408_153137.jpg

plate_1.png

20250408_175139[1].jpg

Variable layer heights2 walls15% infill1mm thick shellOne material

2025-04-08_719af2771e9cf.jpg

Variable layer heights2 walls15% infill1mm thick shell

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If this was useful to you, please Boost Me!</boostcontent></boostme>This TPU blower is a relatively quick and useful print. Use it as a project to hone in your H2D&#39;s two material printing or just save time and print it quickly with just TPU with an A1 Mini up to the X1C. The blower produces a blast of clean directional air. Fast rebound of bulb pressure due to innovative one-way valve. Additionally, the blower can stand upright on its own. &nbsp;Dimensions: -145mm long -45mm nozzle -55mm diameter

Print Profile(2)

Description

Comment & Rating (65)

License

Related Models

TPU Blower

Print Profile(2)

Description

Comment & Rating (65)

License

Related Models