7th Gen Honda Accord 5-Speed Manual Shift Knob

I wanted a more interesting version of the stock shift knob of my Accord, so I designed my own. It used ~47.5g (~15.5m) of material.

Designed explicitly for the 7th gen Accord, but the knob itself has a M10x1.5 screw tap if you want to use it on something else.

Regular PLA is NOT recommended, I used PETG, but other high-temperature materials such as ASA should work too. 

Slicing instructions:

• <0.12mm resolution recommended
• >30% "Gyroid" infill 
• Seam position: Back
• Supports: Normal auto & Snug
• Brim: I used a Supertack plate and a 10mm brim on the knob and 7.5mm brim on the lower piece worked well

Assembly:

• Remove supports and brims from model
• Remove stock knob (pull down on boot then unscrew the knob)
• Slide down lower piece all the way (make sure the seam faces away from you for best aesthetics)
• Screw on new knob until tight and seamless