Ammo box 22lr 6 x 10

nicely designed, however the distance between the rim of the cartridges a to little so they get stuck on to the others. I guess scale 101%would fix that

printed with ASA

This works great in our shower. Highly recommend it.

Initially scaled up to 101% on the box and lid but then increased to 102% on the lid's x-axis to make the lid fit more tightly and not slide open by itself. Printed with Bambu Lab's PETG

Super nice print.

Hi, Great design !!!!!!!!!!!!!!!!!!!!! I like the 6X so that it fits my competitions. I printed one and I would like to please make some suggestion: I think you are using too much filament and time making the "cylinders" for the bullets all way from bottom to top., I would suggest you make the outer box as it is but inside it's "empty", just a recess to then hold a piece like the plastic one that comes with CCI -Standard but with 6 bullets (You will have to design this() aside vs the 5 from CCI (and most manufacturers) . We then glue (or not) that part and there you go! we have our 6x10 (or whatever) box that will print faster and with less filament. Many thanks in advance!

Does prints very well however, the lid can separate the angles on the walls. It just seemed to be a little bit too thin.

lid did not fit, had to sand alot to get it to work

Good idea. As suggested I had to enlarge the box 101% and the lid 102% to fit well. Still I had to press the rims that popsup when sliding the lit, but it`s rattlefree :-)